Szakálfém KFT

Welding

In the beginning Szakálfém LLC. has only dealt with carbonized steel tank welding for railway and other uses. With changes in requirements the complex construction of stainless-steel tanks has come into the forefront.

Our welding factory has the required contractor certification according to railway specifications, and can perform and document VT and PT examinations in its own authority.

At our new site we have built a modern welding factory with separate boxes, based on Fronuis type Trans Tig and Magic Wave machines. We have specific devices for length-weld creation, capable of max. 2100mm long welds.

Only qualified welders can work in our factory, and our employees performing welding supervision are continuously trained in their tasks.
ismeretében.

Welding procedures:

AWI blanket gas
AFI blanket gas
CO₂

Welding materials:

stainless-steel up to 2-8 mm sheet thickness
carbonized steel up to 2-16 mm sheet thickness
aluminum up to 1-3 mm sheet thickness

Welding machines:

Length welding semi-automatic up to 2100 mm
FRONIUS
WELDI
TRAKIS

Our welding factory is can perform MAG and WIG welding according to the following:

Description of procedure	Group of used materials	Size range	Jointing	Position	Certifier
135	WGr.: 1.1	Sheet 3-16 mm	Blunt	PA	TÜV Rheinland Group
135	WGr.: 1.1	Sheet 3-16 mm Pipe over 20mm wall thickness 2,1-6mm a=2,22-4,5 mm	Corner	PB	TÜV Rheinland Group
135	WGr.: 1.1	Sheet 3-16 mm a=2,5-10 mm	Corner	PB	TÜV Rheinland Group
141	WGr.: 8.1	Sheet 1,4-2,6 mm	Blunt	PA	TÜV Rheinland Group
141	WGr.: 8.1	Sheet 1,4-3,0 mm a=1,5-3 mm	Corner	PB	TÜV Rheinland Group
141	WGr.: 8.1	Sheet 1,4-4 mm	Blunt	PA	TÜV Rheinland Group
141	WGr.: 8.1	Sheet 3-8mm	Blunt	PA	TÜV Rheinland Group
141	W.Gr.: 22.3	Sheet 1,0-4,0	Blunt	PA	TÜV Rheinland Group
141	W.Gr.: 22.3	Sheet 1,0-4,0 A= 1,5-3 mm	Corner	PB	TÜV Rheinland Group

< Prev

Nyelvváltó

Welding